Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Search found 193 matches
Matronics Email Lists Forum Index
Author Message
  Topic: Needed Cessna 310A 1970s model Maintenance manual
Thruster87

Replies: 0
Views: 2632

PostForum: Cessna-List   Posted: Sun Sep 15, 2013 2:38 pm   Subject: Needed Cessna 310A 1970s model Maintenance manual
Looking to getting a hold of a Cessna 310 1970 model maintenance manual. Need to balance the elevator. Any help would be appreciated[ we are a non profit historical aircraft restoration museum in OZ] ...
  Topic: Anyone installed Fuel Injection on a 3300A
Thruster87

Replies: 0
Views: 1431

PostForum: JabiruEngine-List   Posted: Wed Jul 11, 2012 10:24 pm   Subject: Anyone installed Fuel Injection on a 3300A
Interested in hearing from anyone that has installed fuel injection on a Jab 3300. Like the SDS em kits.Seems there are not too many current discussion on the web. Cheers
  Topic: Drilling aluminum
Thruster87

Replies: 3
Views: 3482

PostForum: Zenith601-List   Posted: Fri Jun 29, 2012 2:39 pm   Subject: Re: Drilling aluminum
Don't get too concerned with the drilling process just de-burr everything.[Drilling is much more critical in pressurized aircraft which yours is not] Cheers [retired aircraft mech.]
  Topic: Previous post [Single mom makes real money ] has a virus
Thruster87

Replies: 0
Views: 1552

PostForum: Zenith601-List   Posted: Wed May 23, 2012 1:47 pm   Subject: Previous post [Single mom makes real money ] has a virus
The post [Single mom makes real money working from home] comes up as having a nasty virus embedded in it. Beware
  Topic: Engine Surges
Thruster87

Replies: 3
Views: 2544

PostForum: JabiruEngine-List   Posted: Wed Mar 28, 2012 5:16 pm   Subject: Re: Engine Surges
Talked to Jab Aus and they cannot source the black floats anymore so back to white.After changing idle jet to 45 and freeing the balance tube blockage took the plane for a circuit and everything went ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Fri Mar 02, 2012 9:15 pm   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
Hi mate

so how was it blocked..
is it something to watch when doing an install?
Chris..A small screw like the one on the back of a computer case was screwed into the carbi bayonet fitting and th ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Tue Feb 28, 2012 12:38 pm   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
Found the fault,a blocked balance tube also adjusted the float level up a couple of mm and it purrs like a kitten.Just waiting for the weather to fine up [been the wettest Feb in OZ for decades] to go ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Wed Jan 18, 2012 1:39 pm   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
Alan, full marks for your perseverance in the air with a problem that
would leave some on the ground.

What's the fuel supply set up?. In a Thruster I assume you still have
mechanical and electri ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 8
Views: 7238

PostForum: JabiruEngine-List   Posted: Mon Jan 16, 2012 7:15 pm   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
I have not really had a chance to play around with the throttle while concentrating on flying other then pushing the throttle [back over 2000rpm] in so as not to stall it and then once on short final ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 8
Views: 7238

PostForum: JabiruEngine-List   Posted: Mon Jan 16, 2012 2:11 am   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
Spoke to the people at Jabiru today and in their testing, screwing the mixture in or out made very little difference to the engine operation.They are a bit baffled by the surging.They advised the thin ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 8
Views: 7238

PostForum: JabiruEngine-List   Posted: Sun Jan 15, 2012 12:56 am   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
[quote="aerobiz1(at)gmail.com"]Is the LLD you drilled to 1.5mm  the air bleed at the intake bellmouth or the fuel jet in the float bowl that feeds the starting jet(choke) ?

Yes it was at ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Sat Jan 14, 2012 10:53 pm   Subject: Re: Bing 94 Idle circuit inlet aperture drilling 3300A
I've been having trouble getting my mixtures correct as on turning base and bringing back the rpm below 2000 it starts to surge down to 1500rpm and then up 300 rpm and if I pull back below 1500 it sur ...
  Topic: Cracked Canopy
Thruster87

Replies: 33
Views: 26693

PostForum: Zenith-List   Posted: Sat Dec 31, 2011 8:52 pm   Subject: Re: Cracked Canopy
I ended up using large headed
  Topic: Cracked Canopy
Thruster87

Replies: 33
Views: 26693

PostForum: Zenith-List   Posted: Sat Dec 31, 2011 1:00 pm   Subject: Re: Cracked Canopy
I ended up using large headed [1/2 long x 1/8Dia] self taping screws on the bottom steel RHS tubes.On the hinge cover panel I put in anchor nuts .I also cut the sides of the canopy less, so that th ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Mon Dec 26, 2011 1:00 pm   Subject: Re: Bing 64 Idle circuit inlet aperture drilling 3300A
T87,

First, the Bing fitted to Jabiru engines (2200 and 3300) is a 94. The 64 is used on Rotax 912 series engines.

Which jet drilled out to 1.6 mm are you talking about? Some folks have enlarged ...
  Topic: Bing 64 Idle circuit inlet aperture drilling 3300A
Thruster87

Replies: 12
Views: 13683

PostForum: JabiruEngine-List   Posted: Sun Dec 25, 2011 1:37 pm   Subject: Bing 64 Idle circuit inlet aperture drilling 3300A
ZENITH 601xlB


How much difference is there in the operation of the idle stage [fitted in a 3300A] once it has been drilled out to 1.6mm ?? and what is the approx number of turns from stop are yo ...
  Topic: 20° BTDC for spark timing instead of the original 25°.
Thruster87

Replies: 0
Views: 1548

PostForum: JabiruEngine-List   Posted: Tue Oct 25, 2011 11:51 pm   Subject: 20° BTDC for spark timing instead of the original 25°.
Has anyone adjusted the timing on the 3300 solid lifter to the following:

Note that late-model 3300 engines

The new part has been indexed to give 20° BTDC for spark timing instead of the orig ...
  Topic: Electrical Problem with Ray Allen Indicator?
Thruster87

Replies: 4
Views: 2370

PostForum: Zenith-List   Posted: Tue May 17, 2011 10:14 pm   Subject: Re: Electrical Problem with Ray Allen Indicator?
After 15hrs TT [last week] my Aileron Ray Allen LED indicator stopped working as well.Elevator LED indicator working just fine so far.Bit of a pain in the neck as mine are located on the center panel ...
  Topic: Real bolt failure count?
Thruster87

Replies: 2
Views: 2268

PostForum: Zenith601-List   Posted: Mon May 02, 2011 1:42 pm   Subject: Re: Real bolt failure count?
By using the new nut you are gaining almost a 50% increase in thread take up,thus the load is less per thread which in turn reduces the chance of breakage.Longer studs /bolts are available if so desir ...
  Topic: What a joke
Thruster87

Replies: 5
Views: 4262

PostForum: Zenith601-List   Posted: Sun May 01, 2011 9:20 pm   Subject: Re: What a joke
A local flight training center that has been using Jabiru aircraft for the past 12yrs, swears by the new nut modification,they found that the new nuts can be torqued more easily [the small nuts feel l ...
 
Page 1 of 10 Goto page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
All times are GMT - 8 Hours
Jump to:  


Powered by phpBB © 2001, 2005 phpBB Group