Matronics Email Lists

So it turned out to be a loose ground wire behind the instrument panel instead of a faulty sensor. If anyone wants a new one for a Europa tank I have one for 1/2 price.

Looking to replace the 23 year old Princeton fuel probe that was supplied by Europa and is no longer available. Anyone know of a suitable replacement?

It’s just polyester fabric and widely available.

Can anyone recommend a source for Araldite 420 A/B in the USA? I’m doing the tri-gear conversion and there doesn’t seem to be a suitable substitute.

Europa factory trailer for sale in Southern California. Converting to a Trigear so it’s not needed.

That’s a pretty steep grade. Might be safer to use the winch that is on the trailer. I wouldn’t recommend pushing on the stab spar.

That’s a pretty steep grade. Might be safer to use the winch that is on the trailer. I wouldn’t recommend pushing on the stab spar.

Unfortunately I can’t make it but a good topic would be, Is the Europa company still viable. They are asking for payment in full with a promised delivery date. Enquires on overdue our orders we’re ...

The only problem I’ve had in 800+ hours with the Airmaster occurres when carbon accumulates on the slip ring obscures the rpm sensor trigger. That’s the little round brass insert. Cleaning it off ...

I’m expecting the tri-gear shortly from Europa and preparing for the installation. I’m in California and looking for a dolly setup to support the fuselage while converting. I’ve seen Bud’s dol ...

Hi Tony and congratulations on your first flight. Can you tell us more about the landing gear setup, is that a Berube setup?

I’ve had that problem before. I installed the o ring as usual then clean off the oil from the face and valve cover. Apply the same sealant used for the gearbox onto the cover and o ring and let cure ...

I had to replace the 180 degree hose to the radiator and did it with a 90 degree silicone hose. I inserted a coil spring inside to keep it from collapsing and has worked well for 4 years now. You can ...

The fuselage isn’t on a trailer so what’s supporting it?

Chris what have you used to coat the inside of the cockpit? Is it Rhino paint? I'm almost ready to strip out and reupholster 181's interior and looking ag options...
I sprayed some on 77EU 20 years a ...

After sending the propeller to Whirlwind in San Diego for inspection they said the blade pitch drive pin fell out and will ship it to Whirlwind in Ohio for a blade replacement as it couldn’t be repa ...

Yesterday’s test flight to dial in the pitch setting on the Whirlwind CS propeller
was interesting. I was at 8500’ in an expanding orbit around the airport, there’s a loud bang followed by sev ...

I had ordered a Trigear conversion kit back in September 2021. They must be still having difficulty sourcing parts. Following this thread in hopes of sourcing the nose gear and main gear myself.

I’ve had at least 6 BFR’s in my Europa using 4 different CFI’s with no problems or LODA.

That’s the same as my XS plenum and fits pretty tight, just like everything else.